Configure EPP communication settings
To integrate Direct for NetSuite with DSI Enterprise Printing Platform (EPP), you must configure all necessary communication settings with EPP.
Prerequisites:
-
Your Direct solution includes label printing.
-
EPP 9.8.1 is installed and configured. Refer to the Enterprise Printing Platform Setup Guide.
To configure EPP communication settings in Direct for NetSuite, complete the following steps in NetSuite.
-
Go to Direct > Configurations > Direct Configurations and open the desired configuration record.
-
On the Configurations page, on the Printer Setup tab, complete one of the following actions.Step Information
-
To create a new printer configuration record, select New Direct EPP Configuration.
-
To edit an existing printer configuration record, select Edit.
-
-
On the Direct EPP Configuration page, for EPP Domain, enter the domain for your EPP instance.Step Information
-
For Webservices Endpoint, enter the webservices endpoint directory, such as /DSIPrint/printservice/job.Step InformationNote:This information can be obtained from your EPP instance.
-
For EPP Port, enter the port for your EPP instance.
-
For TCP/IP, enter https.
-
For EPP Username, enter the user name of the desired administrator user in your EPP instance.
-
For EPP Password, enter the password that corresponds with the specified EPP user name.
-
For Configuration, ensure that the desired Direct Configuration record is selected.
-
Select Save.
Postrequisite: Configure EPP printers
Loading...
There was a problem loading this topic